Water injection flag size_ Introduction of four commonly used water injection flag sizes

You are here：suitcaseluggagetag > Blog >

Water injection flag size_ Introduction of four commonly used water injection flag sizes

Release time：2022-07-09 15:35 view：135 次

Model of water injection flag

The water injection flag has four sizes: 3M, 3.5m, 5M and 7m. The base can easily change the place of placement. With the whirling head that can rotate with the wind, it can resist force seven winds without falling down. The picture is waterproof and sunscreen, and can be used outdoors for a long time. The installation is simple and convenient. The height of the flag pole can be adjusted arbitrarily within the range, and the height of the crossbar can be adjusted with the size of the flag surface, which is convenient for disassembly and replacement. The water injection flag is beautiful and durable, the length of the flag pole can be scaled freely, and the plastic water injection base is convenient to carry and placed more stably. The following introduces the size of the 3-meter, 3.5-meter, 5-meter and 7-meter water injection flag, the size of the picture, and the details of the flag pole and base.

The picture size of 3M water injection flag is 60*120cm, 60*150cm, 60*160cm, and it can also be made into 60*180cm, 80*180cm, but it is not recommended to use a large size flag, and the picture size is too large and easy to fall; The flagpole of the 3.5-meter water injection flag is made of iron with white paint on the surface, which can rise up to 3 meters at most; The base is made of high-quality super hard PVC, which is not easy to be crushed or leak. The base is royal blue, and 10 kg of water can be injected to ensure the stability of the flagpole. The base is packed in hard cartons, 20 sets per box, and the flagpole is also packed in cartons, which is also 20 sets per box, which is convenient for transportation and logistics.

3M water injection flag

The picture size of the 3.5m water injection flag is 80*200cm, 80*210cm, 80*220cm, and it can also be made as 80*250cm. However, it is not recommended to use a large picture. The picture size is too large and easy to fall. The flag pole of the 3.5m water injection flag is made of iron, and the surface is baked black paint, which can be raised to 3.5m at most; The base is made of high-quality super hard PVC, which is not easy to be crushed or leaked. The base is also black, and 15 kg of water can be injected to ensure the stability of the flagpole; The base of the 3.5m water injection flag is packed with 10 sets of hard cartons per box, and the flag pole is also packed with 10 sets of cartons per box, which is convenient for transportation and logistics.

4m water injection flag

The dimensions of the 5m water injection flag are generally: 3.6*1.2m, 1.2*3.8, 1*3 m, 1*3.5m, 1*3.8m, 1.1*3.5m, 1.1*3.5m, 1.1*3.8m, and the maximum picture size is 1.2*3.8m.

Color: silver gray

Material: high quality aluminum alloy rod, plastic base

The diameter of aluminum alloy middle vertical rod is 54.6mm, and the diameter of four support rods is 27mm

Base size: 78*78*18cm

Package size: 1 set and 2 cases (rod + seat)

Rod package size: 160*12*12cm

Base size: 81*36.5*41cm

Configuration: flagpole + base + carton

Plastic parts, high strength and wear resistance

5m water injection flag

The size of the 7m water injection flag is generally 1 * 5m, 1.1 * 5m, 1.2 * 5m, and the maximum picture size is 1.2 * 5m. The material of the flag pole and base of the 7-meter water injection flag is basically the same as that of the 5-meter flag, with the difference only in height.